top of page

Accessories

NO LOAD TAP CHANGER

A tap changer is a connection point selection mechanism along a power transformer winding that allows a variable number of turns to be selected in discrete steps. It is used for regulating output voltage for variable input voltage levels manually.

 

ON LOAD TAP CHANGER

A tap changer is a connection point selection mechanism along a power transformer winding that allows a variable number of turns to be selected in discrete steps. It is used for regulating output voltage for variable input voltage levels automatically and can be combined with  remote control panel, automatic voltage regulators

 

BUCHHOLZ RELAY

Buchholz relay is a safety device mounted on only  transformers with conservator tank. It  is located between tank and conservator tank. The Buchholz Relay is used as a protective device sensitive to the effects of dielectric failure, which causes gas accumulation, inside the transformer.

VERTİCAL PROTECTION RELAY

Vertical protection relay is used for monitoring oil level in hermetically sealed transformers. If the oil level falls under certain level, vertical protection relay operates the relays with contacts on it.

MOISTURE HOLDER

Moisture Holder is used for taking out the moisture of the air that enters the conservator tank. It is only used on transformers with conservator tank.

VERTICAL OIL LEVEL INDICATOR

Oil level indicator is used for monitoring oil level in hermetically sealed tank.

MULTI FUNCTIONAL PROTECTION RELAY

Multi Functional Protection Relay is  safety device for hermetically sealed oil filled distribution transformers which combines four different safety functions into a single, compact and solid device. The multi functional protection device continuously monitors pressure and temperature levels as well as gassing or dielectric level decrease inside the transformer tank.

PRESSURE SAFETY VALVE

Pressure safety valve is used for relieve the over pressure in the tank in order to avoid damage of the tank. It is commonly used in hermetically selaed transformers.

 

BIMETAL THERMOMETERS

Bimetal Thermometers are used for monitoring the oil temperature in transformer. It is equiped with two contacts for tripping and alarm.

OIL LEVEL INDICATOR

Oil level indicator is used for monitoring oil level in conservator tank. Oil level indicator is located on the conservator tank.

ATLAS TRAFO , ATLAS Trafo A.Ş. , Transformer, Trafo,Transformatör, Distribıution Transformer, Dağıtım Trafosu, Yağlı Tip Transformatör, Trafo Üreticisi, Transformer Manufacturer Turkey, Transformayör Üretimi İzmir,Güç Trafosu, Güç Transformatörü, Trafo Yağı, Trafo Bakımı, Tamir, İZmir, Türkiye, Trafo İzmir,trafo izmir,turkey, Trafo Türkiye, Transformatör İzmir

bottom of page